3D Tomorrow Astro PLA filaments are a premium product proudly made in Britain, Stroud, Gloucestershire. Their filaments are manufactured using high standards that ensure strict quality control, producing superior 3D prints. They use eco-friendly spools that are 100% recyclable and operate a #ZeroWaste program where old spools are purchased back. The paper tape is also recyclable, and 3D Tomorrow always strive to use recycled packaging where possible, as they believe in sustainable manufacturing practices.
3D Tomorrow understand the importance of delivering high-quality filaments while maintaining our environmental ethos. That’s why they vacuum seal products with a desiccant pouch to ensure they arrive in excellent condition. They are committed to reducing carbon footprint and are carbon neutral, so look out for the logo on the shipping label. With 3D Tomorrow’s Astro PLA filament, you can have confidence in using a sustainable, premium product that provides exceptional results, and you’re doing your part to protect the environment.
I wanted to share some insights with you about filament options. I have a section with bullet points below that covers different aspects of each filament I am considering. One of these points is about the difference between matte and gloss finishes. In my experience, printing with a matte finish won’t result in the same pearl effect as a gloss finish. To achieve the glossy look, it’s best to print at a slightly higher temperature of 215 to 220 degrees. I hope this information helps you in your filament selection process!
It is evident from the photo above that every glitter filament from 3D tomorrow is different in some way. The reason this filament manufacturer would like your feedback is because at the moment the Astro Glitter PLA range is not complete on which colours will be added to the collection. Using this method allows a colour to be tested for popularity before committing to a production level of the colorant.
This manufacturer gets the colourants blended into PLA directly so that the colorant reaches the maximum degree of purity, but to avoid creating unpopular products, they have created a small batch of colours to avoid wasting any. For the Astro Glitter PLA Range, 3D tomorrow now plans to make 500 gram reels also for the full production version at a cost of £19.99, except for the Galaxy Black, which will continue to be produced in 1KG rolls.
I would thus like to summarize my thoughts on the Astro Glitter PLA Filament range. I believe that it is a high-quality material at a price that is reasonable. There are some Glitter filaments in the range that do need to be removed, modified, or replaced with another colour, for example, orange, yellow, pink, or in fact something of a lot different like rainbow glitter filament?.
Whenever you use filament that has larger particulates in it, it is typically recommended to use a larger nozzle size. However, for me, 0.4 worked like a charm. As part of my plan, I intended to use four 3D printers to allow me to finish this article faster, however the Fokoos did not play ball. This had nothing to do with 3D tomorrows filament. It happened with Sunlu TPU, Eono silk rainbow PLA and 3Djake magic PLA.
